ADVANTAGES

• Excellent food grade properties.
• Excellent adhesion to the surface corrosion, protection properties.
• Good temperature / abrasion resistance properties.

APPLICATION

• Internal coating for potable water pipelines.
• Internal coating for potable water storage.

APPLICATION METHODOLOGY

• Prepare surface by mechanical grinding, shot blasting conforming to SA2½.
• Remove dust, flakes, oil, grease or other loose foreign particles by sand blasting, iron brush or compressed air.
• Stir drums of each component thoroughly for uniformity. For best result, use a variable speed drill mixer with a spiral type blade at the bottom of stirrer rod. The speed may be 400-600 rpm. Pre heat part-A @ 50-65°C and Part-B @ 25-40 °C.
• Apply CLI Guard 40 by plural feed airless spray gun to the required thickness on the substrate.
• The tip pressure typically 2500-4000 psi (the tip pressure should be adjusted to achieve good atomization of the spray).
• Tip size typically 19-25 Thou orifice.
• The coating repair should be done by brush application with the same material provided the mixing quantity of Component A and component B should be done as per requirement of the repairing job because of the lower pot life of the material. Mixing will be done in a drill type mixer. For repairing job, heating of individual component is not required.

CHARACTERISTICS

CLEANING & MAINTENANCE

Clean all tools immediately after use with CLI cleaner.

HEALTH & SAFETY

• Use mask, nose cover and hand gloves during application.
• Clean hands with soap water after application.
• Ensure adequate ventilation and avoid inhalation of vapours as some people are sensitive to resins, hardeners and solvents.
• Avoid contact with skin / eyes. In case of unlikely contact with eyes, rinse immediately with plenty of clean water, then cleanse with soap and lukewarm water and seek medical advice. Do not use solvent to clean the contacted area.
• Prevent swallowing. In case of unlikely swallowing, seek medical attention immediately. Do not induce vomiting .

PACKING

Available in 200 L – 150 L Comp A and 50 L Comp B.

STORAGE AND SHELF LIFE

Store in a cool dry place under shed away from heat. The shelf life of product is 12 months in original unopened sealed condition.

CONDITIONS OF SALE

Sold subject to the Company's conditions of sale which are available on request.

NOTE

The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development; we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products; however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.